Services

Access to purchase slot cars.

Access to purchase racing time.

               rules and regulations

road coarse racing on the paperclip

B&S Raceway Slot Car Track
Specifications for Series Racing 2024/25

B&S Raceway Slot Car Specifications for Series Racing 2024/25 v6
B & S Raceway. 121 Johnson Ave South. Talladega, AL 35160

Late Model
1. This class is intended to be a spec, simplified introductory class but is open to all racers.
2. JK C21 2-piece 4-Inch Stamped Steel Felxi Chassis Only. No Aluminum pans.
3. Motor: JK Hawk 25 Only.
4. Chassis: Bushings only.
5. Spec Gear Ratio. 18T Pinion/35T Spur, 64 Pitch Gears Only.
6. Spoiler: May add spoiler not to exceed 5/16 inches from trunk deck height.
7. Vintage Car Body Only. Thickness: 0.007” or 0.010”, No 0.005” allowed.
JK7253B Camaro B123A/B
JK7254B Mustang B124A/B
JK7355B Javelin B138A/B

LMP/GT-1
1. Any 4-Inch Stamped Steel Felxi Chassis.
2. Motors: JK Hawk 7, Mid America Eagle MID605, or Chicagoland CR102 Only.
3. Chassis: Bushings only.
4. Any Gear Ratio. 64 pitch Gears Only.
5. LMP / GT-1 Bodies Only.
Any LMP / GT-1 Body Except NO:
Outisight Sleath GT-1 OS500, OS501

NASCAR
1. Any 4-Inch Stamped Steel Felxi Chassis.
2. Motors: JK Hawk 7, Mid America Eagle MID605, or Chicagoland CR102 Only.
3. Chassis: Bushings only.
4. Any Gear Ratio. 64 pitch Gears Only.
5. NASCAR or NASTRUCK bodies only.

GTP
1. Any 4-Inch Stamped Steel Felxi Chassis.
2. Same Rules as LMP and NASCAR.
3. Motors: Same as LMP / NASCAR. May use Mid-America Phoenix MID602.
4. Chassis: Bushings or may use Ball Bearings.
5. Any Gear Ratio. 64 pitch Gears Only.
6. Any GTP body Except NO:
Outisight Sleath GTP OS520

Indycar /formula 1
1. Chassis: JK C30 JK251171 Narrow or JK C35 JK251172 Wide Chassis.
2. Chassis: Bushings Only. Front Axle Bushings not soldered.
3. Motors: JK Hawk 7 Only.
4. Any Gear Ratio. 64 pitch Gears Only.
5. Bodies: JK Indy/F1 Wide/Narrow Bodies, Ralph Thorne Wide Bodies.

B&S Raceway Slot Car Track
Specifications for Series Racing 2024/25

B&S Raceway Slot Car Specifications for Series Racing 2024/25 v6
B & S Raceway. 121 Johnson Ave South. Talladega, AL 35160

GroupF wingcar
1. EDM Cut Spring Steel Chassis.
2. Scratchbuilt Brass/Wire Chassis.
3. Motor: May use Mid America Phoenix MID602, Mid America Supra MID610, or Chicagoland CR104.
4. Chassis: Bushings or may use Ball Bearings.
5. Any Gear Ratio. 64 or 72 pitch Gears.
6. Any Winged body.

Brushlessclasses
1. These are experimental, development classes and depend on racer interest.
2. GTP and Wing Car. Same rules as the brushed classes, except:
3. Brushless Motors, Any ESC, Any KV Motor.

GENERAL RULES
1. General rules apply to all classes unless otherwise noted in class specifications.
2. Motors: Sealed F Can (Falcon style) motors. No modifications to the motor. No magnet strengthening.
Unapproved motors must be replaced with an approved motor under green flag.
3. May use body clips or pins.
4. Chassis: Maximum width at any point is 3.25 inches.
5. Chassis: Clearance to be .047 at rear axle for all classes.
6. Chassis: Front clearance will not be checked, but chassis is not allowed to drag on the track. Any car found
to be dragging excessively will be “Black Flagged” and must be repaired under green flag.
7. Bodies: Must be cut on molded in cut line. Interiors Optional, Not Required.
8. Bodies: No added wing or aerodynamic control other than standard body unless otherwise specified.
9. Bodies: Interiors are optional, may be paper or plastic, 2D or 3D. Windows may be clear or tinted.
10. Axles: 3/32 solid rear axle. No hollow or lightened axles. No exotic material axels.
11. Front Wheels: Wheels must be visible, either clear or by cut-outs. Stickers may be used in place of wheels.
12. Any Rear Tire. Black Tires Only.
13. Rear Tire width max: 0.810 inches.
14. Rear Tire track width max: 3.25 inches.

racing RULES
Classes to be run at each event will be announced in advance of the event. Race fees will be announced in
advance of the event. Races will consist of 3-minute segments with 2-minute intermission between segments to
change lanes. European lane rotation will be used. Lane assignment will be randomly picked by lap counter
computer. If more than eight racers enter, a round robin format with sit-outs will be used.
Track: Track voltage nominal 14.2 volts.
This is a family friendly hobby, as such: All racers are expected to conduct themselves in a sportsmanship
like manner. Non-sportsmanship behavior or foul language will not be tolerated.

Frequently Asked Questions

“I had a blast racing at B & S Raceway! The staff was friendly and the racing tracks were amazing. It's the perfect place for some friendly competition and a lot of fun. Can't wait to go back!”

-Greg Winfield 

"I had so much fun and now I have a new hobby!"

-James Brasher

About us

B & S Raceway is dedicated to providing a thrilling and safe environment for slot car racing enthusiasts. Our passion for racing drives us to create an exceptional experience for all our visitors. Whether you're a seasoned racer or a first-timer, we welcome you to join us for an unforgettable racing adventure!